meet i-Spin 360™ Max, our spinning booster car seat, made for safe and simple everyday journeys.

the full rotation seat that starts rearward facing with the infant insert and grows all the way to booster.

at a glance

installation	harness mode with ISOFIX and load leg, booster mode with the car's seat belt, ISOFIX optional, base included
usage	car seat
suitable for	rearward facing from birth, 40 to 105 cm, forward facing from 15 months, 76 to 105 cm, with the five point harness, then 100 to 150 cm as a booster
safety standard	ECE R129/03
product weight	14 kg
manual	available to download below
video	2 guides

fitting in your car

i-Spin 360™ Max installs with harness mode with ISOFIX and load leg, booster mode with the car's seat belt, ISOFIX optional, base included, as set out in the instruction manual. The step by step for your exact car lives in the manual below. The check that matters: once fitted, give the seat a firm wiggle where it meets the car. A correct fit stays put. If anything moves more than a little, take it out and start again... it takes a minute and it is always worth it.

using i-Spin 360™ Max day to day

Buckle up the same way every time: straps lying flat and snug, nothing twisted, and the headrest climbing as your child grows. The instruction manual shows every adjustment, so the fit stays right, ride after ride.

washing and caring for i-Spin 360™ Max

Crumbs and spills happen, that is what little ones are for. The wash label stitched into the fabric and the care section of the manual tell you what comes off and how it washes best, and the frame just wants a wipe with a damp cloth and mild soap. One rule above all: if i-Spin 360™ Max has been through an accident, retire it and replace it, safety first.

watch and learn

videos (2)